Item Number:
Aluminum crack testing is used to check for damage in the inner microstructure of the metal.
Very often, large areas need to be checked for cracking in order to check whether other body parts have been affected by a crash. A typical example of this is the MacPherson strut area.
The diffusion red penetrant is applied to the surface to be tested. Due to its properties and capillary force, it penetrates the finest cracks and pores and is drawn back to the surface after cleaning with the developer. Due to the high contrast to the white developer, even the smallest cracks and defects can be detected.
Note: The liquids and agents have no negative properties on welds or on the surfaces on which they are used, they can be easily removed from the surfaces with the test agent cleaner without leaving any residue.
Application:
1. Clean the surface thoroughly with cleaner Ardrox 9PR5.
2. Apply diffusion red Ardrox 9VF2 and leave to work for approx. 10-20 minutes.
3. Thoroughly clean the surface again with cleaner Ardrox 9PR5.
4. Apply developer spray Ardrox 9D1B until reaction.
5. Check the surface for cracks.
| Content: | 400 ml |
|---|
£31.99
1 in stock (can be backordered)
Application:
1. carefully clean welding surfaces / surface with Clean CLEANER Ardrox 9PR5
2. apply PENETRATION SPRAY Ardrox 9VF2 and let it work for approx. 10-20 minutes
3. Clean the welding seams / surface carefully again with Clean CLEANER Ardrox 9PR5.
4. apply DEVELOPER SPRAY Ardrox 9D1B until it reacts
5. check welding surfaces / surface for possible cracks
Packing unit: 1 pc.
Content: 400 ml
Gross weight: 0,360 kg
