Item Number:
The Power Lift, including electrode holder, is an ideal addition to the proven Airpuller AP95 dent removal system, enabling efficient removal of deep and large body dents and dings. Experience outstanding performance and precision with this innovative accessory.
Application
1. The Power Lift can be easily secured without the use of tools.
2. Fully depress the power button of the AP95, hang the Power Lift in the AP95 cage, and then release the power button.
3. Weld the Power Lift electrodes (included) in place, pull up the lever, and twist off the electrode.
4. The Power Lift provides ample space to eliminate sheet metal tensions simultaneously with the dent removal hammer.
5. Always support the Power Lift on sheet metal edges or at the edge!
6. After removing the Power Lift, any remaining dents in the sheet metal can easily be removed with the Airpuller AP95.
| Coating: | powder-coated |
|---|---|
| Details: | Support surface 70 x 70 mm |
| Length × width × height: | 690 x 150 mm |
| Weight: | 1,970 kg |
£229.99
1 in stock (can be backordered)
Product information “Powerlift incl. Electrode Fixture”
Application notes / benefits:
1. no tools are required for the attachment of the Power Lift to the AP95
2. press AP95 power switch completely, hook the Powerlift into the AP95 cage, release power switch
3. weld on the Powerlift electrodes (included in the scope of delivery), pull up lever and unscrew the electrode
4. the Powerlift leaves enough space to release the sheet tension with the dent removal hammer at the same time
5. always place the Powerlift on the edges of the sheet
6. after removing the Powerlift – correct remaining dents with the Airpuller AP95
Packing unit: 1 pc.
Net weight: 1.700 kg, 1.97
Material: Steel powder-coated
Specifics: Support surface 70×70 mm
Gross weight: 1.970 kg
LengthXWidthXHeight: 690×150 mm
1 pc
