Bumper Storage Rack For 4 Large Bumpers FMT222

Bumper Storage Rack FMT222 – Floor Standing Rack for 4 Large Bumpers

The FMT222 is a floor standing bumper storage rack that holds up to 4 large bumpers safely off the ground. Because it keeps freshly painted bumpers protected and organised, you avoid the costly rework that comes from accidental workshop damage. As a result, jobs move through the shop faster and your paint materials go further.

At £208.99, the rack pays for itself the first time it prevents a bumper respray. Because one damaged bumper can easily cost more than the rack itself, the FMT222 is one of the simplest investments a bodyshop can make.

The Real Cost of Poor Bumper Storage

Every bodyshop owner has seen it happen. A freshly painted bumper gets leaned against a wall, balanced on a workbench or placed on the floor — and within hours it picks up a scratch, scuff or dent from workshop traffic. Because the damage occurs after painting, the bumper has to go back through prep and paint again.

That rework costs time, materials and booth capacity. Furthermore, it delays the vehicle handback and ties up a job slot that could generate revenue. The FMT222 eliminates this problem entirely because it gives every bumper a dedicated, protected storage position from the moment it leaves the booth.

Holds 4 Large Bumpers

The FMT222 holds up to 4 large bumpers at once — enough for 2 vehicles’ worth of front and rear bumpers. Because modern bumpers are increasingly large (especially on SUVs, crossovers and pickup trucks), the rack’s 1000 mm width provides ample support across the full span of today’s bumper covers.

With 4 dedicated positions, you can store bumpers from multiple jobs simultaneously. As a result, each bumper stays separated from the others, which prevents paint transfer, pressure marks and surface-to-surface scratching.

Floor Standing Design

The FMT222 uses a simple floor standing design — so there is no wall mounting, no drilling and no installation required. You simply place the rack where you need it and start using it straight away. Because the rack stands independently, you can reposition it at any time to suit your workshop layout.

This flexibility makes the FMT222 a good choice for workshops that rearrange their layout seasonally or that need to move storage equipment between areas. In contrast, the wall mounted FMT409S stays in a fixed position — which suits workshops that want a permanent storage point near the paint booth.

Compact 500 mm Depth

At just 500 mm deep, the FMT222 has a slim profile that sits close to the wall without projecting far into the workshop. Because the depth is minimal, the rack takes up very little usable floor space. Consequently, you can position it along a wall, beside a workbay or in a corridor without obstructing vehicle movement or pedestrian access.

Despite the compact depth, the support arms hold bumpers securely. Because bumpers are curved and lightweight relative to their size, 500 mm of support is sufficient to keep them stable and prevent them from tipping or sliding off.

2000 mm Height – 4 Positions Stacked Vertically

The FMT222 stands 2000 mm tall, which allows 4 bumper positions to stack vertically within a compact footprint. Because the bumpers sit at different heights, you can load and unload each one independently without disturbing the others.

In addition, the 2000 mm height keeps the top bumper position at a comfortable working height for most technicians. Therefore, loading and unloading bumpers does not require stretching, bending or using steps.

Light Grey RAL 7045 Finish

The FMT222 comes finished in Light Grey (RAL 7045), which gives it a clean, professional appearance that blends into any workshop environment. Furthermore, the durable finish resists the scuffs and marks that come from daily workshop use. As a result, the rack maintains its appearance over years of service.

Frees Up Floor Space

Without a dedicated bumper rack, workshops typically store bumpers on the floor, on workbenches or leaned against walls. All of these methods waste valuable floor space and create trip hazards. Because the FMT222 stores 4 bumpers vertically in a footprint of just 1000 mm × 500 mm, it consolidates bumper storage into a fraction of the space that floor-level storage would require.

Consequently, the workshop floor stays clear for vehicle movement, trolley access and pedestrian traffic. This is especially important in smaller workshops where every square metre counts.

Bumper Storage Rack Comparison – FMT222 vs FMT224S vs FMT409S

Bodyshop Solutions offers three bumper storage solutions. Because each one serves a different workshop size and layout, choosing the right rack depends on your capacity needs and available space:

If you need a straightforward, no-installation bumper rack that you can place anywhere in the workshop, the FMT222 is the simplest option. However, if you need higher capacity, the FMT224S holds 8 bumpers on wheels. On the other hand, if floor space is your main concern, the FMT409S mounts to the wall and folds flat when empty.

Bumper Storage Rack FMT222 – Technical Specifications

Ideal Applications

• Paint shop holding area — because freshly painted bumpers need immediate, safe storage while they cure
• Prep bay — so bumpers awaiting flatting, priming or masking stay protected and organised
• Strip-down area — since removed bumpers need a dedicated place until they go for repair
• Assembly area — therefore finished bumpers sit at a convenient height for refitting
• Parts storage zone — because centralising bumper storage keeps the workshop tidy and audit-ready

Benefits at a Glance

• Holds 4 large bumpers — so you can store front and rear bumpers from 2 vehicles at once
• Floor standing — because there is no installation, drilling or wall mounting required
• Compact 0.5 m² footprint — consequently the rack takes up minimal floor space
• 2000 mm height — therefore all 4 positions stack vertically within a slim profile
• Protects painted bumpers — since dedicated positions prevent scratching, stacking and floor damage
• Pays for itself quickly — because one prevented respray covers the cost of the rack
• Light Grey RAL 7045 — so the rack looks clean and professional in any workshop
• Easy to reposition — as a result, you can move it to suit your current layout
• No assembly or tools needed — which means you can start using it straight away
• Frees up floor space — because vertical storage replaces bumpers scattered across the workshop floor

Ordering and Expert Advice

Bodyshop Solutions supplies professional workshop equipment across the UK. For advice on bumper storage racks or to place an order, call us on 01327 300700.