Mobile Vehicle Panel Storage Rack For 4 Panels FMT1223

Mobile Vehicle Panel Storage Rack FMT1223 – Holds 4 Large Panels

The Mobile Vehicle Panel Storage Rack (FMT1223) is a robustly built storage and transport solution that holds up to 4 large vehicle body panels. Because it features a fully welded steel frame and durable plastic-coated uprights, this rack safely accommodates doors, bonnets, tailgates, wings and other full-size body panels — keeping them organised, protected and ready for the next stage of repair.

At £213.99, the FMT1223 is the compact, mid-capacity option for bodyshops that need reliable panel storage without taking up too much floor space.

Why Use a Dedicated Panel Storage Rack?

During a typical collision repair, technicians remove between 3 and 8 panels from a single vehicle. Without proper storage, these panels often end up leaning against walls, stacked on benches or placed on the floor. As a result, they pick up dents, scratches and paint chips — and that leads to costly rework before the panels can go back on the vehicle.

The FMT1223 solves this problem by giving each panel its own dedicated slot. Because the panels stand upright and separated, they stay protected throughout the repair process. Consequently, you spend less time on touch-ups and more time on productive work.

Ideal for Smaller Workshops and Single-Vehicle Jobs

With 4 panel slots, the FMT1223 is perfectly sized for workshops that typically strip one vehicle at a time. For example, a standard door and wing repair usually involves removing 3 to 4 panels — so this rack holds exactly what you need for one job. In addition, its compact 1200 mm width means it fits easily into tight workshop spaces, side bays and storage areas.

This makes the FMT1223 particularly useful for:

• Small to mid-size bodyshops that handle one or two vehicles at a time
• Smart repair and SMART centres where floor space is limited
• Mobile repair units that need a compact, sturdy rack for on-site work
• Paint shops that need to store freshly painted panels safely before refitting

Fully Welded Construction for Heavy Use

Unlike bolted or clip-together alternatives, the FMT1223 features a fully welded steel frame. As a result, the rack is rigid, stable and built to withstand the demands of daily use in a professional workshop. There are no joints to loosen over time, no bolts to retighten and no risk of the frame flexing under load.

Furthermore, the fully welded design means the rack arrives ready to use — so there is no assembly required. Simply fit the casters and start loading panels straight away.

Plastic-Coated Uprights Protect Panels

All uprights on the FMT1223 feature a tough, durable plastic coating. This coating serves two important purposes:

• Prevents metal-to-metal contact — so panels do not get scratched, chipped or dented when they rest against the uprights
• Absorbs minor impacts — therefore reducing the risk of cosmetic damage during loading and unloading

This is especially important when you store freshly painted panels or new replacement parts that must remain in perfect condition until you fit them to the vehicle.

Fully Mobile with Heavy-Duty Rubber Casters

The rack comes fitted with 4 heavy-duty 100 mm rubber swivel casters, and one of these includes a brake. Because the casters use rubber, they provide smooth, quiet movement across workshop floors without marking or damaging the surface. In addition, the braked caster locks the rack securely in position during loading and unloading, which prevents unexpected rolling.

Because the rack is fully mobile, technicians can wheel it directly to the vehicle during strip-down and then move it to the storage area, paint shop or assembly bay as needed. As a result, moving 4 panels at once on a single trolley is significantly faster and safer than carrying them individually.

FMT1223 vs FMT1205 vs FMT1227 – Which Panel Rack Do You Need?

Bodyshop Solutions offers three panel storage racks to suit different workshop sizes and workloads. However, the key differences are capacity and frame width:

If you typically strip one vehicle at a time and need a compact rack, the FMT1223 is the ideal choice. On the other hand, if you handle higher volumes, the FMT1227 stores up to 12 panels on a single rack. Alternatively, the FMT1205 offers 5 slots at the lowest price point.

Mobile Vehicle Panel Storage Rack FMT1223 – Technical Specifications

Typical Panels Stored on the FMT1223

• Doors (front and rear)
• Bonnets
• Tailgates and boot lids
• Front and rear wings
• Roof panels
• Quarter panels

Benefits at a Glance

• Holds 4 large panels — so you can store a full single-vehicle panel set on one rack
• Compact 1200 mm width — therefore fitting easily into tight workshop spaces
• Fully welded steel frame — consequently requiring no assembly and no loosening joints
• Plastic-coated uprights — which prevent scratches and paint damage
• Heavy-duty rubber casters — providing smooth, quiet, floor-safe movement
• Braked caster — so the rack locks securely during loading
• Reduces rework — because panels stay protected throughout the repair process
• Speeds up workflow — as a result, technicians move panels on one trolley instead of carrying them individually

Ordering and Expert Advice

Bodyshop Solutions supplies professional workshop equipment across the UK. For advice on panel storage racks, workshop organisation or to place an order, call us on 01327 300700.