Vehicle Parts Storage Trolley FMT615

Vehicle Parts Storage Trolley FMT615 – One Cart for Every Displaced Part

The Vehicle Parts Storage Trolley (FMT615) is a purpose-built mobile cart that keeps all displaced vehicle parts organised, protected and together in one place. Because it combines mesh side frames, hooks, straps, a wire basket and an adjustable shelf, this trolley handles everything from large body panels down to small fixings and trim clips — so nothing gets lost or damaged during a repair.

Currently reduced from £469.99 to £351.99, the FMT615 is a versatile all-in-one storage solution for any size of bodyshop or workshop.

Why Use a Dedicated Parts Storage Trolley?

During a collision repair, technicians remove a wide range of parts from the vehicle — panels, bumpers, trim pieces, mirrors, light units, fixings, clips and wiring harness sections. Without a dedicated storage system, these parts end up scattered across the workshop on benches, shelves and the floor. As a result, small items go missing, panels get scratched and technicians waste time searching for parts when it comes to reassembly.

The FMT615 solves this problem by giving every type of part its own dedicated storage zone on a single trolley. Consequently, everything stays together, stays protected and moves with the job from strip-down through to reassembly.

Four Storage Zones on One Trolley

Unlike simple panel racks or basic shelving, the FMT615 provides four distinct storage areas. Because each zone handles a different type of part, you can organise an entire vehicle strip-down on one cart:

1. Mesh Side Frames with Hooks and Straps

The trolley features two mesh side frames that run the full height of the cart. These frames come fitted with hooks and straps, so you can securely attach doors, wings, bonnets and other body panels to the sides. Because the panels hang vertically against the mesh, they stay separated and protected from scratches. Furthermore, the straps hold them firmly in place during transport, which prevents panels from sliding or falling.

2. Wire Basket for Small Items

A dedicated wire basket sits within the trolley frame, providing contained storage for small parts such as fixings, clips, bolts, trim pieces, mirror assemblies and light units. Because these items sit in a basket rather than loose on a shelf, they cannot roll off or get mixed up with parts from another vehicle. As a result, reassembly is faster and nothing goes missing.

3. Adjustable Wire Shelf for Bulkier Items

An adjustable wire shelf provides a flat storage area for mid-size and bulkier items — for example, bumper reinforcement bars, headlamp assemblies, interior trim panels and dashboard components. Because the shelf height is adjustable, you can position it to suit the parts you need to store on each job. This flexibility makes the trolley adaptable to different vehicle types and repair scopes.

4. Base Area for Large and Heavy Items

At the bottom of the trolley, there is an open base area designed for the largest and heaviest items. This is ideal for bumper covers, subframe components, radiator assemblies and other heavy parts that benefit from sitting low on the cart. Because the weight sits at the base, the trolley remains stable and balanced during movement.

228 kg Safe Working Load

The FMT615 has a safe working load (SWL) of 228 kg. As a result, it comfortably handles the combined weight of panels, trim, fixings and mechanical parts from a full vehicle strip-down. This generous capacity means you can load the trolley confidently without worrying about exceeding the weight limit, even on larger vehicles such as SUVs and vans.

Fully Mobile with 100 mm Swivel Casters

The trolley comes fitted with 4 × 100 mm swivel casters that provide smooth, easy movement across workshop floors. Because all four casters swivel, the trolley is highly manoeuvrable — so technicians can wheel it directly to the vehicle during strip-down and then move it to the storage area, paint shop or assembly bay as needed.

Moving all displaced parts on a single trolley is significantly faster and safer than carrying items individually. In addition, keeping everything on one cart reduces the risk of parts being left behind or mixed up with another job.

Compact Footprint for Any Workshop

Despite its generous storage capacity, the FMT615 has a compact footprint of just 890 mm × 590 mm. As a result, it fits easily into tight workshop spaces, between work bays and in storage areas. The 1700 mm height makes full use of vertical space, so you get maximum storage without taking up valuable floor area.

This compact design makes the FMT615 suitable for workshops of all sizes — from small independent bodyshops to large multi-bay repair centres.

Finished in Light Grey RAL 7045

The trolley is finished in Light Grey (RAL 7045), which provides a clean, professional appearance that suits any workshop environment. Furthermore, the powder-coat finish is durable and easy to clean, so the trolley maintains its appearance even after heavy daily use.

Vehicle Parts Storage Trolley FMT615 – Technical Specifications

Typical Parts Stored on the FMT615

• Mesh side frames: doors, wings, bonnets, tailgates, bumper covers
• Wire basket: fixings, clips, bolts, trim clips, mirror assemblies, light units
• Adjustable shelf: headlamp assemblies, interior trim, dashboard components, bumper reinforcement bars
• Base area: bumper covers, subframe parts, radiator assemblies, heavy mechanical components

Benefits at a Glance

• All-in-one storage — so every displaced part stays on a single trolley from strip-down to reassembly
• Four dedicated storage zones — therefore handling panels, small parts, bulky items and heavy components separately
• Hooks and straps — which secure body panels firmly to the mesh side frames
• Wire basket — so small fixings and clips cannot go missing
• Adjustable shelf</strong