Item Number:
The welding machine combines high productivity with precise arc control. Dynamic AC/DC current makes it suitable for both aluminum and stainless steel welding. Automatic pulse settings and Synergy functions simplify operation, while a digital display for volts and amps enables precise control. The 5 meter welding cable ensures maximum freedom of movement.
Important functions:
• AC wave/current modulation: Selectable between sine, trapezoidal or rectangular for defined weld seam geometry
• MixTIG: Automatic switching between AC and DC for reduced energy input (ideal for constrained positions)
• Hyper Active Arc: Consistent heat input for stable welding results
• High-frequency pulse welding:
– Stable arc control
– Deep penetration into the material
– Reduced heat input
• Low-frequency pulse welding:
– Optimum weld pool control
– Particularly suitable for thick material and difficult positions
– Active Boost System: More power & protection against mains fuse tripping
Equipped with:
1 x 332222 TIG torch SR 26 | with manual gas valve | 4 m
1 x Ground cable | 4 m
1 x Operating instructions
| Current setting range: | 4 – 200 A (WIG) |
|---|---|
| Effectiveness: | 75 % |
| Fuse: | 16 A (slow) |
| Length × width × height: | 385 x 173 x 315 mm |
| Mains connection (Cu): | 3 × 2,5 mm² |
| Mains voltage: | 1 ~ 230 V |
| Mark of conformity: | CE |
| Open circuit voltage: | 105 V (WIG) |
| Operating temperature: | -10 bis 40 °C |
| Power factor: | 0,73 |
| Protection class: | IP 23 |
| Weight: | 14,8 kg |
£3,789.00
1 in stock (can be backordered)
Product information “WS TIG 200 Welding Machine”
• AC/DC – dynamic impulse arc for more productivity. • Easy operation• Automatic pulse adjustment• TIG and MMA welding• Current modulation automatically• 5 meter supply cable• Digital volt and amp display• Synergy settings• Active Boost System
Packing unit: 1 pc.
Supply voltage: 230 V (+10%/20%)
Voltage range: 4-200A
Power factor: 0,75 @ 170A/26,8 V
Efficiency: 87 %
Temperature class: H (180°C) / S
Power supply (Cu): 3 x 2,5 mm²
Fuse: 16 A time-lag
Continuous output: 110A
Open-circuit voltage: 68V
Certificatons: CE
Welding current: AC/DC
LängexBreitexHöhe: 385x173x315 mm
Net weight: 17,000 kg
Lenght: 5 m (power cable)
Working temperature: -10°C…+40°C
Protecton category: IP23
Frequency: 50/60 Hz
Temperature range: -40°C…+80°C (Lager)
1 pc
with TIG torch SR26 4 m, earth cable 4 m and manual
