D-ARC 200 Aluminium Spotter (816160)

D-ARC 200 Aluminium Spotter – Weld Hook Washers Directly onto Aluminium Panels

The D-ARC 200 is a drawn-arc aluminium spotter that welds hook washers directly onto aluminium alloy panels. As a result, there is no need for separate studs or screw-in hook washers. This saves you time and simplifies the entire dent pulling process on aluminium body panels.

How Does the D-ARC 200 Work?

The D-ARC 200 uses drawn arc technology controlled by a built-in microprocessor. In simple terms, the unit creates a short electric arc that fuses hook washers onto the aluminium surface quickly and precisely. Therefore, you get a strong, reliable attachment point for pulling dents — without drilling, screwing, or using separate studs.

Furthermore, the system runs on standard 230V single-phase power and does not need any shielding gas. This means you can set it up and start working straight away, with no extra gas bottles or regulators to worry about.

Key Benefits

• Direct welding — spots hook washers straight onto aluminium panels, so no studs are needed
• No gas required — runs on 230V mains power only, which keeps running costs low
• Microprocessor controlled — ensures consistent, precise welds every time
• Adjustable welding current — up to 200A, so you can fine-tune settings for different panel thicknesses
• Lightweight and compact — just 7.4 kg and 38.5 x 15 x 26.5 cm, making it easy to move around the workshop
• High efficiency — 92% efficiency rating for reliable, low-waste performance
• Real time saver — removes the extra steps of fitting studs and screwing in washers

What Is Included?

• D-ARC 200 aluminium spotter unit (816160)
• D-Arc gun for precise hook washer placement
• 50 flat hook washers AlMg (804140)

Technical Specifications

Ideal Uses

• Pulling dents from aluminium body panels in collision repair
• Aluminium panel straightening in professional bodyshops
• Workshops handling modern vehicles with aluminium-intensive body structures
• Any repair where hook washers need to be attached to aluminium quickly and cleanly

Why Choose the D-ARC 200 Over Traditional Methods?

Traditional aluminium dent repair often involves welding studs onto the panel and then screwing hook washers into place. However, this adds extra steps, extra consumables, and extra time. In contrast, the D-ARC 200 welds hook washers on in a single action. Consequently, you spend less time on each repair and more time moving vehicles through the workshop.

In addition, because the unit is microprocessor controlled, every weld is consistent. This reduces the risk of burn-through or weak attachment points, which is especially important on thin aluminium panels.

Why Buy from Bodyshop Solutions?

We have supplied professional bodyshops across the UK for over 15 years. As a result, we understand the tools and equipment you need to work efficiently on modern vehicles. Moreover, our team can advise you on the best setup for your workshop and provide ongoing support after purchase.

Want pricing or need advice on aluminium repair equipment? Call our team on 01327 300700.