Celette Griffon XL Bench (GXL08.5812.3)

Celette Griffon XL – Drive-On Straightening Bench for Commercial Vehicles and SUVs

The Celette Griffon XL is a purpose-built, extra-long drive-on jig bench designed for professional bodyshops that repair commercial vehicles, vans and large SUVs. At 5.79 metres long and 2.05 metres wide, the Griffon XL gives you the space to carry out simultaneous repairs at the front and rear of the vehicle — significantly reducing cycle times on large jobs.

As the sole UK and Ireland distributor for Celette, Bodyshop Solutions supplies, installs and supports the full Griffon XL system with factory-trained expertise.

Key Features

• 5.79 m long × 2.05 m wide – extra length and width for commercial vehicles, large SUVs and long-wheelbase models
• 2,800 kg lift capacity – handles heavy commercial vehicles with ease
• Drive-on design with access ramps – load vehicles quickly without additional lifting equipment
• Ramp lift to 1.32 m height – comfortable working height for technicians
• Two independent inner lifting units – raise the vehicle wheel-free for full underbody access
• Hydraulic tilting system – tilt the vehicle for improved access to damaged areas
• Sill clamps and decking plates included – secure the vehicle firmly for accurate pulling and straightening
• Approved by major vehicle manufacturers – meets the standards required for manufacturer-approved repairs
• Simultaneous front and rear repair – two technicians can work on opposite ends at the same time

How the Griffon XL Works

The Griffon XL uses a drive-on design, so you simply roll the vehicle onto the bench via the built-in access ramps. Once in position, the sill clamps lock the vehicle securely to the bench frame. From there, the two independent inner lifting units raise the vehicle off its wheels, giving you full underbody access for structural measurement and repair.

The hydraulic tilting system adds another dimension of flexibility. By tilting the bench, you can improve access to hard-to-reach damage without repositioning the vehicle. As a result, you spend less time on setup and more time on productive repair work.

Because the bench measures 5.79 metres, two technicians can work simultaneously — one at the front and one at the rear. This is particularly valuable on heavy commercial vehicle repairs where multiple structural areas need correction.

Technical Specifications

What’s Included

• Celette Griffon XL bench base
• 4 × sill clamps
• Runway decking plates
• Access ramps

Additional Items You May Need

To complete your Griffon XL setup, you will likely also need:

• Sevenne 10T pulling unit – provides the pulling force for structural correction
• Trolley and winch – for positioning and loading vehicles onto the bench

Contact us for advice on the right accessories for your workshop requirements.

Who Needs the Griffon XL?

The Celette Griffon XL suits professional bodyshops and collision repair centres that:

• Regularly repair commercial vehicles, vans, SUVs and long-wheelbase models
• Need a drive-on bench that eliminates the need for separate vehicle loading equipment
• Want to reduce cycle times by enabling simultaneous front and rear repairs
• Hold or are working towards vehicle manufacturer approvals that require certified straightening equipment
• Need heavy-duty capacity — the 2,800 kg lift handles most commercial vehicles

The Celette Bench Range

The Griffon XL sits at the top of the Celette bench range. If you need a lighter or more compact solution, consider the Celette Sevenne XL — a mobile jig bench that shares the same 5.79 m length but without the drive-on ramps and inner lifts. The Sevenne XL also offers an upgrade path to the Griffon XL, so you can start smaller and scale up as your workshop grows.

Pair with a Celette Measuring System

For complete structural verification during repairs, pair the Griffon XL with the Celette NAJA 3D electronic measuring system. The NAJA delivers real-time 3D measurement during the pull process, so you can monitor correction progress and document results for insurers and manufacturer audits.

Why Buy from Bodyshop Solutions?

Bodyshop Solutions is the exclusive UK and Ireland distributor for Celette. Therefore, when you buy the Griffon XL from us, you get a complete package: professional installation, on-site training, ongoing technical support and access to the full range of Celette brackets for hire with next-day delivery.

With over 15 years of experience equipping bodyshops across the UK, we understand the demands of commercial vehicle repair and manufacturer approval programmes. We can advise on the right bench, measuring and straightening equipment for your workshop.

Call us on 01327 300700 for expert advice, pricing, or to arrange a site visit. Contact us here.